CTS

Corrosion Technology Systems, Inc.

Product Lines Concrete Restoration Epoxy Terrazzo Flooring Systems High Temperature Coatings Joint Systems Methyl Methacrylate (MMA) Moisture Vapor Treatment (MVT) Polymer Concrete/Pump Grouts Secondary Containment Specialty Coatings Tank Linings Thermal Insulative Coatings Wall Systems Wastewater Rehabilitation & Protection
Back to top...

Concrete Restoration

Damaged concrete from chemical attack can range from mild corrosion and spalling to major deterioration. CTS can work with you to specify the most cost effective solution for restoring your damaged concrete and for protecting it from future attack. Our line of next day topcoat concrete restoration systems and waterproofing products will repair your structures effectively and economically.

Product Listing · View Gallery

Epoxy Terrazzo

Epoxy terrazzo is a composite material poured in place or precast, which is used for floor and all treatments. It consists of marble, quartz, granite, glass or other suitable chips, sprinkled or unsprinkled, and poured with an epoxy. Terrazzo is cured, ground and polished to a smooth surface or otherwise finished to produce a uniformly textured surface.

Product Listing · View Gallery

Flooring Systems

From decorative to industrial, institutional to secondary containment, CTS offers flooring solutions that provide outstanding durability and overall performance. We can develop your flooring and coatings solution based on a variety of specifications including; chemical resistance, impact & wear resistance, thermal shock resistance, ESD/Conductivity, slip resistance, moisture vapor tolerance, and color & appearance. Our flooring solutions include epoxy terrazzo, mortars, sealers, and even residential garage floor coating systems.

Product Listing · View Gallery

High Temperature Coatings

A wide range of heat resistant coatings for the chemical processing, power generation and OEM markets exist. With the ability to apply to hot surfaces and protect up to 1600F, CTS offers unique heat resistant products for your unique applications.

Product Listing · View Gallery

Joint Systems

Without an effective joint system in place, your seamless flooring system may not be as successful as planned. CTS offers various types of joint systems including mildly chemical resistant flexible and rigid material to highly chemical-resistant viton caulks that can stand up to the most aggressive chemicals.

Product Listing · View Gallery

Methyl Methacrylate (MMA)

Key Resin MMA products are made of 100 percent reactive methyl methacrylate resin. Key Resin MMA is a two component acrylate resin which is free of thinner and cures very rapidly in a chemical reaction. Advantages of MMA flooring include the ability to walk, drive or install machinery on it just hours after application, it is chemically resistant, can be applied in temperatures below zero, and is available in non-slip or smooth textures.

Product Listing · View Gallery

Moisture Vapor Treatment (MVT)

Moisture Vapor Transmission (MVT) is the natural migration of moisture vapor through sub-grade earth and building components. If not addressed, this MVT can have damaging effects on all types of impermeable flooring systems. CTS offers a variety of moisture vapor mitigation products based on the amount of vapor transmission present and the desired application method.

Product Listing · View Gallery

Polymer Concrete/Pump Grouts

Vibration is a key factor in the maintenance of pumps and other rotating equipment. Epoxy grouting of pump baseplates provides a chemically resistant pump pad that dampens vibration eight times that of concrete, thirty times that of steel and in turn reduces alignment problems and premature failure. Effective dampening reduces pump-shaft vibrations caused by resonance. It also helps to absorb shock loads and reduce startup vibrations. The end result is a significant increase in the mean time between failures, reduced maintenance expenses, and longer life for mechanical seals and bearings.

Product Listing · View Gallery

Secondary Containment

Secondary containment is required for the storage of all regulated hazardous materials and approved coatings must be applied to surfaces when spills or leaks would damage or penetrate the uncoated secondary containment system. CTS can assist in specifying products that are resistant to virtually any chemical.

Product Listing · View Gallery

Specialty Coatings

CTS carries a number of unique specialty coatings for your niche applications. From direct-to-oil and direct-to-rust products to stainless steel flake filled coatings to name a few, contact CTS with your unique coating requirements.

Product Listing · View Gallery

Tank Linings

CTS's portfolio provides high performance protection and corrosion resistance for many critical areas throughout tank storage facilities, terminals, over-the-road trailers, and chemical processing areas. Our line of coatings provide the most advanced tank protection available for chemical, product, and oil tanks. The high tech coatings withstand all IMO approved chemical cargoes and do not allow a chemical to permeate the lining, thus assuring product purity and superior corrosion resistance.

Product Listing · View Gallery

Thermal Insulative Coatings

Our thermal insulation coating products fulfill niche market areas of temperature under 400°F on all types of substrates. The insulating coating works not only to reduce temperatures but also provides energy savings, thermal insulation and personnel protection all in an easy spray-on application.

Product Listing · View Gallery

Wall Systems

Resinous coating wall systems are ideal solutions where ease of maintenance and chemical resistance are needed for your wall surface. Systems include glass reinforced or simple expoxy applications, with an optional urethane topcoat for anti-graffiti applications. Typical applications may include bath and locker rooms, kitchens, animal care facilities, and inmate cells.

Product Listing ·

Wastewater Rehabilitation & Protection

CTS's engineered systems approach to each project allows us to provide the Total Solution to wastewater rehabilitation and protection. From stopping active water leaks and restoring concrete or brick structures to protecting these structures from the effects of microbiologically-induced corrosion (MIC), we can work with you to design a system that aren't limited to any single chemistry or method of application.

Product Listing · View Gallery